The current and voltage measure elements are used to measure the current and voltage of network buses and to connect voltage or current output to HYPERSIM® control blocks.
The following table shows the various elements and parameters.
| Description | Element | Input | Output | Parameters: Name | Parameters 1.init.va | Function and Conditions |
|---|---|---|---|---|---|---|
| Measures three-phase voltages |
| B | a b c | Ga Gb Gc | 1.0 1.0 1.0 | Measures voltages Va, Vb, Vc of bus B a = Va * Ga b = Vb * Gb c = Vc * Gc |
| Measures three-phase currents |
| B1 B2 | a b c | Ga Gb Gc Rprobe | 1.0 1.0 1.0 1.0e-3 | Measures currents Ia, Ib, Ic flowing from B1 to B2 by inserting a resistance R a = Ia * Ga b = Ib * Gb c = Ic * Gc |
| Measures single-phase voltages |
| B | y | G | 1.0 | Measures voltage B of bus C y = V * G |
| Measures single-phase currents |
| B1 B2 | y | G Rprobe | 1.0 1.0e-3 | Measures currents I flowing from B1 to B2 by inserting a resistance R y = I * G |
