The OP8E11 module is designed to condition 4 current input signals (0-20mA), produce 4 individually isolated ±18V signals that can be acquired with an analog input mezzanine (for example OP5340).
Features
- 4 channels
- Maximum input current 20mA
- Individual isolation
Board Layout
OP8E11 - Top View |
Channel Description
Each channel converts a 0-20mA input signal into a ±18V signal.
The circuit is optimized for direct connection to shunt resistors or other low voltage level signal sources.
Pin Assignment
Refer to the OP8E00 Modules Pin Assignment table.