The OP8E11 module is designed to condition 4 current input signals (0-20mA), produce 4 individually isolated ±18V signals that can be acquired with an analog input mezzanine (for example OP5340).

Features

• 4 channels

• Maximum input current 20mA

• Individual isolation

Board Layout

Open

OP8E11 - Top View

Channel Description

Each channel converts a 0-20mA input signal into a ±18V signal.

The circuit is optimized for direct connection to shunt resistors or other low voltage level signal sources.

Open

Pin Assignment

Refer to the OP8E00 Modules Pin Assignment table.