Let's start with the HVAC_500kV_6Bus example model. We will add 3 Monitors and configure them to display the RMS voltage of phase A of bus WES0 and WES7 as well as the RMS current of phase A going through Di1 circuit breaker.
Here are the settings for each Monitor:
Monitoring can be started directly from the ribbon:
It can alternatively be started from HyperView, where a table of all monitored values is displayed, and graphs updating in real-time can be generated for the selected monitors.
IMPORTANT NOTE: This functionality triggers periodical micro-acquisitions for a duration of 0.033 second (2 cycles at 60 Hz) every 0.5 second. Depending on the number of acquired signals, its usage may impact real-time performance.