Documentation Home Page HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Monitoring Signals Directly in the Schematic

Let's start with the HVAC_500kV_6Bus example model. We will add 3 Monitors and configure them to display the RMS voltage of phase A of bus WES0 and WES7 as well as the RMS current of phase A going through Di1 circuit breaker.

Here are the settings for each Monitor:

Monitoring can be started directly from the ribbon:

IMPORTANT NOTE: This functionality triggers periodical micro-acquisitions for a duration of 0.033 second (2 cycles at 60 Hz) every 0.5 second. Depending on the number of acquired signals, its usage may impact real-time performance.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323