Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 3
Next »
Supported Features
- Standard registers:
- Coils: Available as a model output, a model input (controlled by the master) or both
- Discrete inputs: Available as a model output
- Input registers: Available as a model output. The supported data types are UINT16, INT16, UINT32, INT32 and FLOAT32.
- Holding registers: Available as a model output, a model input (controlled by the master) or both. The supported data types are UINT16, INT16, UINT32, INT32 and FLOAT32.
- TCP and RTU modes
- Allows multiple slaves instantiation
- Configurable TCP port when operating over TCP mode
- Configurable serial port parameters when operating over RTU mode
- Supports reconnection with master device(s) if a connection is lost
- TCP mode supports connecting multiple masters to the same slave
Limitations
- Modbus ASCII is not supported
- A BlueStorm RS-485 card is needed in case it is required to communicate with multiple slaves on the same physical bus in RTU mode
