This block implements a single-phase ideal two-winding transformer (1 primary, 1 secondary).
The single-phase two-winding transformer models two coupled windings on the same core. The magnetization inductance Lm can be linear or with saturation, it is modeled on the primary side of the transformer. Core losses are modeled as RM resistance located on the primary side of the transformer.
Parameters
| Resistance (Rm) | The resistance and inductance simulating the core active and reactive losses. |
|---|---|
| Inductance (Lm) | |
| Primary Winding | |
| Nominal voltage (V1) | The nominal voltage V, in volts RMS, of the primary winding. |
| Resistance (R1) | The resistance, in pu or ohms, of the primary winding. |
| Leakage inductance (L1) | The leakage inductance, in pu or henries, of the primary winding. |
| Initial current (I1) | The initial current A, in amperes, of the primary winding. |
| Secondary Winding | |
| Nominal voltage (V2) | The nominal voltage V, in volts RMS, of the secondary winding. |
| Resistance (R2) | The resistance, in pu or ohms, of the secondary winding. |
| Leakage inductance (L2) | The leakage inductance, in pu or henries, of the secondary winding. |
| Initial current (I2) | The initial current A, in amperes, of the secondary winding. |
Inputs
- Description of each input
Outputs
- Description of each output
Electrical ports
- Description of each electrical port
Characteristics
- Some time, blocks have special characteristics that need to be explained.