Documentation Home Page ◇ OPAL-RT Schematic Editor Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
The Block Library
Solver Options
The High Speed Converter Solver (HSCS) is available as of Schematic Editor version 3.7. This solver enables the simulation of small circuits with time steps as low as 36ns.
In the Schematic Editor, the High Speed Converter Solver appears as a dedicated subsystem block. When designing a schematic within an HSCS subsystem, only a specific set of blocks is available.
These blocks are identified in this documentation using the following tags:
EHS SOLVER
Content only available for eHS (any generation)HSCS SOLVER
Content only available inside High Speed Converter Solver block
HSCS is currently in BETA mode and contains certain limitations. Please carefully follow these guides when designing a schematic using the solver:
- DECOUPLING Blocks
- SOURCES Blocks
- METERS Blocks
- PASSIVE Blocks
- SWITCHES Blocks
- TRANSFORMER Blocks
- MACHINES Blocks
- Permanent Magnet Synchronous Machine 3-phase Open-end Winding
- Permanent Magnet Synchronous Machine 3-phase
- Permanent Magnet Synchronous Machine 6-phase
- Permanent Magnet Synchronous Machine 12-phase
- Squirrel-Cage Induction Machine
- Doubly-Fed Induction Machine
- Brushless DC Machine
- Squirrel-Cage Induction Machine with Saturation
- Doubly-Fed Induction Machine with Saturation
- Salient Pole Synchronous Machine
- Round Rotor Synchronous Machine
- HELPER Blocks
- SWITCHES WITH INTERPOLATION Blocks
- LINES Blocks
- SYSTEM Blocks