This block implements a constant DC voltage source.
This block represents an ideal voltage source that outputs a constant DC voltage regardless of the current flowing through the block. Constant voltage can be positive or negative. It is described by the following equation:
Vout = V0
Parameters
| DC voltage V0 [V] | Amplitude of the DC signal expressed in volts |
|---|
Electrical Ports
From top to bottom, the electrical ports are the positive and negative ports of the source respectively named p1 and n1
Characteristics
All the parameters of this block can be set to have their values come from a Simulink or HYPERSIM block inport by using the deep panel view
