Documentation Home Page Cell Monitoring Device Emulation Add-On for NI VeriStand Home page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Follow the steps on this page to install the CMDE Add-On and its dependencies to the development machine.  After all steps are complete, see the Deployment Target section to complete the software installation on the Real-Time target.

Step 1. Install the NI Package Manager

NI Package Manager version 23.3 or greater is required.

Step 2. Add Links to the Required Feeds

  • Launch the NI Package Manager

  • Under Settings Capture.PNG, enable Show available packages and feed management tools

  • Under Settings Capture.PNGclick on FEEDS and click Add.

  • Provide a feed name and add the URI shown below.

  • Click Add to confirm.

Feed

Feed URI

Cell Monitoring Device Emulation Add-On

https://ni.opal-rt.com:344/nirepo/v1/files/feeds/opal-rt-cell-monitoring-device-emulation-add-on-public-release

Feed.PNG

Step 3. Install the Cell Monitoring Device Emulation Add-On and NI Software Dependencies

It is not recommended to install different versions of the CMDE Add-On concurrently on the same computer.  If multiple versions of VeriStand are to be used on the computer, install the same version of the CMDE Add-On for all of them.

  • In the PACKAGES tab, select the OPAL-RT Cell Monitoring Device Emulation Add-on for VeriStand corresponding to the VeriStand version you want to use.

  • Click INSTALL

  • If desired, select additional items to install from the list of suggestions.  All items shown in this list can be deselected.

  • Read and Accept the license agreements.

Future updates will be shown in the UPDATES tab if internet access is available.

image-20240619-195306.png

  • No labels