Better performances with eHS! As of version 2.19, we introduced a new calculation optimization in order to reach smaller time steps for the same circuit. Check it out !

For circuits using a half-bridge topology, references generated in the versions 2.18 and before may not match the measurements obtained in 2.19.

Typically, the measurements in 2.19 would be observed to be amplified or offset by a positive factor. To obtain measurements matching the references, please increment the Relaxation parameter by +1 (for positive factor) /-1 (for negative factor) and check the measurements, recursively. How to tune two- and three-level switches (Prediction and Relaxation)