The RCP-EC2K includes the hardware and software components described in the table below.
Component | Component part |
|---|---|
Real-time simulator | OPAL-RT real-time simulator (RTS) compatible models : |
High voltage and current monitoring | OPAL-RT OP8662 |
Inverters/Decoders Interface Panel | OPAL-RT OP8219 |
IGBT-based Power Converter (2x) | Festo 8857-10 |
Dynamometer: Four quadrant dynamometer capable of functioning either as a load or a prime mover. | Festo 8540-00 |
Wound Rotor Induction Machine (WRIM) | Festo 8505-A0 |
Wiring module for WRIM (access to rotor and stator circuits) | Festo 8506-A0 |
Power source/supply | Festo 8525-20 |
3 phase Power Bar (splitter) | Festo 8895-00 |
Connection cables | Festo 30013, 30011, 30012 |
Mechanical Coupling Device (hard rubber gear) | Festo 8943-00 |
Mount rack | Festo 8110 |
Line inductors | Festo 8374-A0 |
Resistance Module | Festo 8311 |
Software | Version |
RT-LAB | 2023.1+ |
Matlab | 2019b+ |
* Contact your local representative if you plan to use the Rapid Control Prototyping Energy Conversion Kit with a legacy RTS model to verify compatibility, depending on your needs.