Library
ARTEMiS/Tools/Decoupling blocks
Blocks
Description
These blocks are used to insert a decoupling delay in a system with a DC bus.
The DCbus delay left and DCbus delay right are designed to be connected together and insert a delay between both ends.
The chopper block is a DC chopper block designed to be connected directly to the input V+ and V- of the DCbus delay left block.
Masks
Parameters
Chopper resistance: The resistance of the chopper in Ohms
Sample Time (s): sample time of the model in seconds.
Signals
Vdc: the DC bus voltage with a delay
Idc: the load current with a delay
Vmid: the chopper middle point voltage.
Example of usage
Simple DC bus delay insertion
A delay is inserted between the DC-bus and the load. The chopper is used to avoid DC bus overvoltage.
Simple DC bus delay insertion with multiple loads
A delay is inserted between the DC-bus and multiple loads.
