Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
Group | Model Configuration, Acquisition |
|---|
| Description | Get the dynamic acquisition trigger that will be used during the simulation. |
|---|
| None |
|---|
| Usage | results = RtlabApi.GetAcqTrigger( acquisitionGroup ) ( signalName, trigSignalName, level, offset, condition, triggerEnabled, triggerType ) = results |
|---|
| Input | - acquisitionGroup: Acquisition group (numbering starts at 0).
|
|---|
| Output | - signalName: Name of the triggered signal.
- trigSignalName: Name of the triggering signal. If “level” is specified then trigSignalName is empty.
- level: Value that must be reached by the trigger signal to trigger acquisition.
- offset: Number of steps (cycles) to wait before starting the acquisition system.
- condition: Condition to be satisfied so that the acquition system is triggered. See OP_TRIGGER_CONDITION.
- triggerEnabled: Specified if the dynamic trigger is enabled or disabled (1/0 = Enable/Disable).
- triggerType: Type of trigger that will start the acquisition TRIG_BY_SIGNAL(0) / TRIG_BY_VALUE(1).
|
|---|
| Exception | - EOK: Success.
- EBADF: Model not specified by previous OpalConnect or OpalSetCurrentModel.
- EINVAL: invalid acquisition group.
- EIO: Error sending the request or receiving the reply.
- ENOMEM: Memory allocation error.
- E2BIG: Too many open connections for this process.
|
|---|
| Examples | None |
|---|
| Related Items | SetAcqTrigger |
|---|
| Modules | import RtlabApi |
|---|
