Block
Mask
Description
The SSI Slave Unpacking block receives the data from the LoadIn and DataIn blocks and recover all signals needed by the SSI Slave Communication block. Signal concatenation and reordering is performed inside the block.
Parameters
This block has no parameters.
Inputs
| DataIn | This signal must be connected to one of the DataINi output ports of the DataIn block. |
| DataInSOF | This signal must be connected to one of the SofINi output ports of the DataIn block. |
| LoadIn | This signal must be connected to one of the Cfg_INi input ports of the LoadIn block. |
Outputs
| TM_Time | This port is used to specify the transfer timeout. |
| BitRes | This port is used to specify the number of bit resolution of the position value. |
| MSBFirst | This port is used to specify the bit shift pattern. |
| GrayEncoded | This port is used to specify if the data is gray encoded or not. |
| Position Value | This port is used to provide the current position of the SSI slave device. |
Characteristics and Limitations
This block has no specific characteristics or limitations.