General Specifications
Product name | OP8660 HIL Controller |
|---|---|
Part number | 310-0055 |
Form factor | 4 U |
Dimensions | 13.33 x 48.26 x 30.8cm HxWxD (5.25” x 19” x 12.125”) |
I/O connectors | DB37F, DB9, banana jacks |
Operating temperature | 10 to 40 ºC (50 to 104ºF) |
Storage temperature | -55 to 85ºC (-67 to 185ºF) |
Relative humidity | 10 to 90%, non-condensing |
Maximum altitude | 2,000 m (6562 ft.) |
Sensors Specifications
Current Sensors
Specifications that apply to the High Current Measurement connectors on the front of the OP8660.
Input range: | 15 A (factory default) |
|---|---|
Signal output range: | ± 10 Volts |
Isolation: | Galvanic, 2.5 Kv |
Bandwidth: | DC to 100 kHz |
Linearity: | < 0.2% |
Rise time: | < 2 Microseconds |
Power supplies: | ±15 Volts |
Voltage Sensors
Specifications that apply to the High Voltage Measurement connectors on the front of the OP8660.
Input range: | Up to 600 volts |
Signal output range: | ± 10 Volts |
Common mode: | Greater than 200 volts after the resistive divider |
Bandwidth: | DC to 100 kHz |
Linearity: | < 0.2 % Rise time: < 2 microseconds |
Power supplies: | ±15 Volts |