The OP7821 provides 16 isolated solid-state relay outputs that can operate up to 250V in both AC and DC configuration.
Channel Description
Each isolated output is a single-pole normally-open solid-state relay with an integrated current-limiting feature that can replace electromechanical relays while enhancing the robustness of wireline-interface applications.
The electrical circuit also implements thermal shutdown.
The dynamic characteristics and current limits of the channel are as follows:
Parameter | Conditions | Symbol | Min | Typ | Max | Units |
---|---|---|---|---|---|---|
Switching speeds | ||||||
Turn on |
| ton | - | 0.30 | 2 | ms |
Turn off | toff | 0.16 | ||||
Current Limit | ||||||
AC/DC configuration |
| ILMT | 300 | 366 | 450 | mAp |
DC configuration |
Face Plate
The OP7821 faceplate holds one DB37F connector.
DB37F Pin Assignments
The connector respects OPAL-RT standard DB37 pinout.
Specifications
Product name | OP7821 |
---|---|
Part number | 126-0458 |
Product type | OP7821 solid state relay |
Connector type | DB37F |
Isolation Voltage | 3750Vrms (between simulator and user equipment) |
Dimensions | 18.8 x 16.4 cm (7.4 in x 6.46 in) |
Operating temperature | 10 to 40 ºC (50 to 104ºF) |
Storage temperature | -55 to 85ºC (-67 to 185ºF) |
Relative humidity | 10 to 90%, non-condensing |
Maximum altitude | 2,000 m (6562 ft.) |