Documentation Home Page ◇ Power Electronics Add-On for NI VeriStand Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Sinewave Generators

Next, we can configure the Sinewave Generators used in the simulation.

  • In the Configuration Tree, expand Circuit Model >> Sinewave Generators 

  • Configure the Sinewave Generators by confirming that the Default Value of each relevant channel is configured as shown in the table below.

  • Click Save.

Frequency Engines

Channel Name

Default Value

Frequency Engine 0

60Hz

SWG 0

Channel Name

Default Value

Frequency Engine

0

Phase

0º

SWG 1

Channel Name

Default Value

Frequency Engine

0

Phase

-120º

SWG 2

Channel Name

Default Value

Frequency Engine

0

Phase

120º

SPWM Generators

Error rendering macro 'excerpt-include' : No link could be created for '2.6 Setting Default Values for the SPWM Generators'.

SPWM Carrier

Channel Name

Default Value

Carrier Frequency

5000Hz

SPWM Generator 0

Channel Name

Default Value

Frequency Engine

0

Phase

0º

SPWM Generator 1

Channel Name

Default Value

Frequency Engine

0

Phase

-120º

SPWM Generator 2

Channel Name

Default Value

Frequency Engine

0

Phase

120º

SPWM Generator 3

Channel Name

Default Value

Frequency Engine

0

Phase

30º

SPWM Generator 4

Channel Name

Default Value

Frequency Engine

0

Phase

-90º

SPWM Generator 5

Channel Name

Default Value

Frequency Engine

0

Phase

150º

  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323