Hardware Setup

The following picture shows the hardware setup that is required to run the example model in HYPERSIM.

• Please, note that the Triphase simulator can be replaced with a real power amplifier.
• It is important to mention that the driver can be tested without the Triphase simulator (or without real amplifier) by simply connecting the optical fiber cable in loopback on the PCI express card. In such a setup, data sent by the simulator can be read back and monitored in Scopeview.
• When the loopback is properly connected on the PCI express card, both LEDs that are on the back of the card should be green.

Accessing the I/O Interface Configuration

The Triphase I/O interface can be configured in the I/O Interface Configuration tool that can be opened from the HYPERSIM ribbon.

For more information, see use of the I/O Interface Configuration.

Interface Configuration

The Triphase I/O interface has a fixed configuration. After adding a new Triphase item, it is normal that nothing appears into the configuration page. I/Os can directly be assigned in the Sensor form.