Quick Nav
Have a question or need help?
Solution
Product Selection Guide
RT-LAB
The RT-LAB CAN Driver requires a CAN bus interface kit to be added to the Real-Time Simulator. The OP3411 kit includes a Kvaser CAN PCIe card and a software license, which support up to 4 CAN channels. For additional CAN channels, additional kits may be added if PCIe slots are available.
Type | Product Number(s) | Optional | Description | Supported Simulators | Additional Requirement(s) | |||
OP4510-series | OP5600-series | OP5700-series | OP5000-series | |||||
Software/Add-on module | OP3411-4510 | CAN bus Interface Kit, KVASER PCIe CAN for OP4510 * OP3414 - RT-LAB Driver included: License for 4 channels | Requires open PCIe slot. Note OP4510 only has one. | |||||
Software/Add-on module | OP3411-5600 | CAN bus Interface Kit, KVASER PCIe CAN for OP5600 * OP3414 - RT-LAB Driver included: License for 4 channels | Requires open PCIe slot. | |||||
Software/Add-on module | OP3411-5707 | CAN bus Interface Kit, KVASER PCIe CAN for OP5707, OP5030, OP6200V2 * OP3414 - RT-LAB Driver included: License for 4 channels | Requires open PCIe slot. | |||||
External Hardware | AB7308 | ANYBUS AB7308 Gateway for CANopen. Contact OPAL-RT for more information. | Requires an OP3411 kit. |
NI VeriStand
When using NI PXIe hardware, the PXIe8510 module supporting 2 to 6 ports is required along with the NI VeriStand Full Development System.