Documentation Home Page ◇ eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Unable to render {include} The included page could not be found.

SPS WORKFLOW SCHEMATIC EDITOR WORKFLOW

Introduction

This firmware includes:

  • One eHS x128 Gen4 Solver
  • One Dual Permanent Magnet Synchronous Machines (PMSM-VDQ) model
  • One Quad Generic Machines (GM) model
  • One Analog Output Mapping and Rescaling (AOMR) module
  • One Analog Input Differential Rescaling (AIR) module
  • One Thermal Losses (TL) module
  • One Saturable Transformer (satXFO) module


LoadIn/DataIn/DataOut mapping


LoadIn

DataIn

DataOut

1

Config eHS

Inputs eHS

eHS Averaged

2

Scenario / Rst eHS = Status

TSDO 1 - eHS 0 to 7

eHS DownSample

3


TSDO 2 - eHS 8 to 15

Digital In 1A - 0 to 7

4

PWM 1A -  0 to 7

TSDO 3 - eHS 16 to 23

Digital In 1A - 8 to 15

5

PWM 1A -  8 to 15

TSDO 4 - eHS 24 to 31

Digital In 1A - 16 to 23

6

PWM 1A -  16 to 23

TSDO 5 - eHS 32 to 39

Digital In 1A - 24 to 31

7

PWM 1A -  24 to 31

TSDO 6 - eHS 40 to 47

Analog In 2A - 0 to 7

8


TSDO 7 - eHS 48 to 55

Analog In 2A - 8 to 15

9


TSDO 8 - eHS 56 to 63

PMSM VDQ 1/2

10


TSDO 9 - eHS 64 to 71

Encoder Input on RS422

11


Digital Out 1A - SDO 0 to 7

Quad Generic Machine

12

Config AOMR

Digital Out 1A - SDO 8 to 15

Encoder Input on Digital In 1A

13

eHS PWM 1 - eHS 0 to 7

Digital Out 1A - SDO 16 to 23

Thermal Losses

14

eHS PWM 2 - eHS 8 to 15

Digital Out 1A - SDO 24 to 31


15

eHS PWM 3 - eHS 16 to 23



16

eHS PWM 4 - eHS 24 to 31



17

Config eHS AIR



18

Config PMSM VDQ1/2



19

Config Encoder Input on RS422

AOMR/ Analog Out 1B -  0 to 7


20

Config Quad Generic Machine

Analog Out 1B -  8 to 15


21

Config Encoder Input on Digital In 1A

Analog Out 2B -  0 to 7


22

Config Thermal Losses

Analog Out 2B -  8 to 15


23

Config Encoder Output on RS422

eHS PWM 1 -  0 to 7


24


eHS PWM 2 -  8 to 15


25


eHS PWM 3 -  16 to 23


26


eHS PWM 4 -  24 to 31


27


eHS SWG


28


PMSM VDQ 1/2


29
Quad Generic Machine

30


Thermal Losses


31
Encoder Output on RS422
32
LEDs
33
TSDO 10 - eHS 72 to 79
34
TSDO 11 - eHS 80 to 87
35
TSDO 12 - eHS 88 to 95
36
TSDO 13 - eHS 96 to 103
37
TSDO 14 - eHS 104 to 111
38
TSDO 15 - eHS 112 to 119
39
TSDO 16 - eHS 120 to 127
40
TSDO 17 - eHS 128 to 135
41
TSDO 18 - eHS 136 to 143

System Overview


Unable to render {include} The included page could not be found.


eHS solver

SPS WORKFLOW SPECIFIC

Connectivity

SPS WORKFLOW SPECIFIC

Source TypeSource IndexSource NameDetails
Input

0CPU Input
1eHS Analog InSlot 2A - Ch00-15
2PMSM VDQ 1/2PMSM1 Ia/PMSM1 Ib
PMSM2 Ia/PMSM2 Ib
3Sine Wave Generator
4Quad Generic Machine

IM1 Stator Ia/IM1 Stator Ib/IM1 Rotor Ia/IM1 Rotor Ib

IM2 Stator Ia/IM2 Stator Ib/IM2 Rotor Ia/IM2 Rotor Ib
IM3 Stator Ia/IM3 Stator Ib/IM3 Rotor Ia/IM3 Rotor Ib
IM4 Stator Ia/IM4 Stator Ib/IM4 Rotor Ia/IM4 Rotor Ib
5Data stream from SFP #00
6Saturbale Transformer
Gate0CPU Gating Signal
1PWM
2Digital InputSlot 1A - Ch00-31

SPS WORKFLOW SPECIFIC

To contextualize the Input and Gate Configuration table with this firmware configuration, the eHS firmware config tab must be configured with the following custom input source enumeration:

{'CPU Model',0,64;'Sine Wave Generator',3,32;'PMSM',2,4;'GM',4,16;'Saturbale Transformer',6,32}

And this custom gate sources enumeration:

{'CPU Model',0,72;'Digital Inputs',2,32;'PWM',1,32}

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Dual PMSM (VDQ) block

      

Dual PMSM Motors VDQ

Machine Label

PMSM 1

PMSM 2

Data In Port Number

28

Load In Port Number

18

Data Out Port Number

9

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module. 
Analog In - Slot 2A - Ch00-01

Encoder Output

Encoder outputs are sent to 
Digital Out - Slot 3B - RS422

Hardware Pin assignment

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Quad Generic Machine (GM) block

      

Quad Generic Machine

Machine Label

IM 1

IM 2

IM 3IM 4

Data In Port Number

29

Load In Port Number

20

Data Out Port Number

11

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module. 
Analog In - Slot 2A - Ch00-01

Encoder Output

Encoder outputs are sent to 
Digital Out - Slot 2B


Encoder 1Encoder 2
ACh00Ch04
BCh01Ch05
ZCh02Ch06

Hardware Pin assignment

Unable to render {include} The included page could not be found.

Communication port configuration for the Thermal Losses (TL) block


Thermal Losses
Data In Port Number30
Load In Port Number22
Data Out Port Number13

Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block


AOMR - Slot 2B

VersionV2
Data In Port Number19
Load In Port Number12

Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Input Differential Rescaling (AIR) block


AIR - Slot 2A

ChannelsCh00-15
Load In Port Number17

AOMR Output

Lane IndexSignal SourceDetails
0eHS OutputseHS Y01-128
1PMSM VDQ 1/2 AnalogOut/wiki/spaces/EFS/pages/22516273
2Quad Generic Machine AnalogOut/wiki/spaces/EFS/pages/22516340
3Data Stream from SFP #01

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Input (AI) block


Slot 2A 

ChannelsCh00-07Ch08-15
Data Out Port Number78

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Output (AO) block


Slot 1B

Slot 2B

ChannelsCh00-07Ch08-15Ch00-07Ch08-15
Data In Port Number19202122

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Digital Input (DI) block


Slot 1A 

ChannelsCh00-07Ch08-15Ch16-23Ch24-31
Data Out Port Number3456

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Digital Output (DO) block


Slot 1A 

ChannelsCh00-07Ch08-15Ch16-23Ch24-31
Data In Port Number11121314
Load In Port Number4567

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Encoder Intput (ENC IN) block


Slot 3A - RS422 

Nb of Encoder Signals2
Load In Port Number19
Data Out Port Number11

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Encoder Output (ENC OUT) block


Slot 3B - RS422 

Nb of Encoder Signals2
Data In Port Number31
Load In Port Number23

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment





  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter