Documentation Home Page ◇ ePHASORSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

On this page:

The multiphase shunt can represent a 1, 2, or 3-phase (only Y-g configuration) shunt device. For the case of three-phase shunt components, the admittance matrix is defined as:

Single Phase Shunt

Symbol

Description

Unit

IDShunt device namea unique name

Status

Connect/Disconnect status of phase 1

Initial value 1 (0 for disconnected)

kV (ph-gr RMS)

Phase to ground rated voltage

kV

Bus1

Name of phase 1 of the connected bus

a unique name

P1 (kW)

Active power phase 1

kW

Q1 (kVAr)

Reactive power phase 1

kVAr

Two Phase Shunt

Symbol

Description

Unit

IDShunt device namea unique name

Status1

Connect/Disconnect status of phase 1

Initial value 1 (0 for disconnected)


Status2

Connect/Disconnect status of Phase 2

kV (ph-gr RMS)

Phase to ground rated voltage

kV

Bus1

Name of phase 1 of the connected bus

a unique name


Bus2

Name of phase 2 of the connected bus

P1 (kW)

Active power phase 1

kW

Q1 (kVAr)

Reactive power phase 1

kVAr

P2 (kW)

Active power phase 2

kW

Q2 (kVAr)

Reactive power phase 2

kVAr

Three Phase Shunt

Symbol

Description

Unit

IDShunt device namea unique name

Status1

Connect/Disconnect status of phase 1

Initial value 1 (0 for disconnected)




Status2

Connect/Disconnect status of Phase 2

Status3

Connect/Disconnect status of Phase 3

kV (ph-gr RMS)

Phase to ground rated voltage

kV

Bus1

Name of phase 1 of the connected bus

a unique name


Bus2

Name of phase 2 of the connected bus

Bus3

Name of phase 3 of the connected bus

P1 (kW)

Active power phase 1

kW

Q1 (kVAr)

Reactive power phase 1

kVAr

P2 (kW)

Active power phase 2

kW

Q2 (kVAr)

Reactive power phase 2

kVAr

P3 (kW)

Active power phase 3

kW

Q3 (kVAr)

Reactive power phase 3

kVAr

Available I/O pins

No

Pin Description

Pin Type

Value/Unit

Instruction

1

Get current magnitude of shunt j

O

A (RMS)

shuntID/Imagj

where j is 1, 2 or 3

2

Get current angle of shunt j

O

Degree

shuntID/Iangj

where j is 1, 2 or 3

3

Set/Get powers of shunt j (profile)

I/O

kW

kVAr

shuntID/Pj

shuntID/Qj

where j is 1, 2 or 3

4

Set/Get status of shunt j

I/O

0: Disconnected

1: Connected

shuntID/statusj

where j is 1, 2 or 3

Example

See the Shunt page in phasor08_IEEE13.xls file in demo PHASOR-08.

  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter