The firmware delivered in this project contains an eHS solver that can be used with OPAL-RT Schematic Editor.
The system delivered has a standard eHS OP4512 configuration. The firmware required is therefore already included in the Schematic Editor database by default.
The firmware can be selected directly from the Simulator Setup interface in the Schematic Editor.
To configure your hardware and firmware in the Schematic Editor for eHS simulation, please refer to the link below.
OPAL-RT Schematic Editor Documentation - Configuring a Setup for Your Simulation
NEXT STEP > Test your system (optional)
If you want to skip the system test, you may want to: