Toolbox | Version Number |
|---|---|
7.8.0 | |
2024.1.4 | |
2.17 | |
2.11 | |
4.7.6 | |
3.5.0 |
Added support for the unit ID feature in TCP mode.
Fixed failure to load a model when only one 32-bit data is configured.
Fixed byte ordering issues for UINT32 and INT32 data types.
Fixed overruns appearing in the context of MuSE remotes distributed among multiple subsystems.
Toolbox | Version Number |
|---|---|
7.8.0 | |
2024.1.3 | |
2.17 | |
2.11 | |
4.7.6 | |
3.5.0 |
Support 3-level NPC in eHS Gen5
Support 3-level T-Type in eHS Gen5
Support FD Line in the Schematic Editor workflow
Support x16 Licence class in the Schematic Editor workflow
Improve error management for license checking in S-function driver and support of High Performance licence for eHS Gen4
Support new License key EHS_CORE_TOKEN to replace the EHS_TOTAL_PERFORMANCE key. Backward compatible with previous licenses
Support new License key EHS_MACHINE_CORE_TOKEN to limit the number of machine in use. Backward compatible with previous licenses
Support OP5369 cards in the OP5700-OP5600 official firmware
Display Schematic Editor model version in eHS CPU Block
Display eHS Licence class in eHS CPU Block
Support Hall Effect sensor speed ratio in PMSM and BLDC Machine models
Support change in cut-off frequency f table inputs low-pass filter for PMSM Variable DQ in Schematic Editor Workflow.
Display more information in the eHSBuildReport about the number of components used. Improved readability of the report.
Fix encoder number of pole pairs for Generic Machine
Fix to use SFP in ports in firmware without AI
Fix State initial conditions of capacitor initial voltage and inductor initial current
Fix Schematic Editor to allow negative values for 2 and 3 Winding Mutual Inductance
Fix the minimum time step of Variable RLC component for a better stability
Change Versal Dual Active Bridge example model solver strategy to 'lowest latency'
Fix inverted Vsq and Vsq signal positions for first machine in Im with Saturation XSG block description
Fix the Advanced command block of the PMSM VDQ and PMSMS SH machines in SPS.
Removed support of Matlab 2020a - 2020b for eFPGASIM
Toolbox | Version Number |
|---|---|
7.8.0 | |
2024.1.2 | |
2.16 | |
2.11 | |
4.7.6 | |
3.4.0 |
Fixed an issue with the Python API when the Excel file name and the third-party file name have a mismatch
Added warning of unsupported type dynamic loads TypLod
Fixed islanded buses connected to 'OFF' switches by deleting all non connected Coupler branch content
Fixed wrong status of exported switches ElmCoup
Fixed mapping of machines without saturation to GENROU with S10/12 set to 0 instead of using GENCLS
Toolbox | Version Number |
|---|---|
7.8.0 | |
2024.1.1 | |
2.16 | |
2.11 | |
4.7.6 | |
3.4.0 |
Added a message to warn the user that the RT-LAB 2024.1 versions will be the last to support TestDrive and the creation of new LabVIEW panels.
Fixed lost connection issue when copying and pasting a widget.
Fixed issue preventing to modify the value of a vector element from a widget.
Driver 1 (listed in alphabetical order) title in Heading 3 - List in this order (Added, Improved, Fixed, Removed)
Fixed problem with analog output cards EEPROM corruption issue.
Delete the toolbox lines that are not relevant.
Toolbox | Version Number |
|---|---|
7.8.0 | |
2024.1 | |
2.16 | |
2.11 | |
4.7.6 | |
3.4.0 |
Added support for MATLAB/Simulink R2023b for RT-LAB and all toolboxes except RT-XSG which depends on Xilinx/AMD Vivado support of MATLAB, now at R2022a.
Added support of MATLAB/Simulink R2019b for RT-LAB and FPGA-Based Simulation for Long Term Support.
Added protection against a proxy server being used on the host environment to avoid slowing down opening, closing, building, and loading projects in this case.
Added the support of FMU with parameters and signals having a coma ',' in their name.
Added Orchestra I/O Framework and Client documentation.
Improved error handling by adding an interface to display errors, invite users to run a diagnostic, and send the diagnostic to the support web page.
Improved rewinding warning messages when FMU initialization fails resulting in simulation failing.
Improved diagnostic tool by adding new ports for node and dotnet servers.
Fixed API performance degradation compared to 2022 RT-LAB versions.
Fixed lost connection issue when adding or removing a subsystem.
Fixed target status management issues after opening RT-LAB.
Fixed console freeze with unassigned dynamic signals.
Fixed crash when loading a model that has a renamed subsystem.
Fixed load issues when simulation step sizes are in nanoseconds range.
Fixed issue in Kvaser V2 card detection when loading a project after importing it.
Fixed issue when using get probes option in the monitoring tool.
Fixed launching ScopeView from the UI interface.
Fixed labview API example model.
Fixed issue related to the software asking to install LabView API every time a panel is edited.
Fixed issue preventing to close properly an older version of RT-LAB when starting up a newer one.
Removed support for MATLAB/Simulink R2020a and R2020b for RT-LAB and all the toolboxes except RT-XSG.
Added a new “Shape” widget which allows to create simple shapes such as triangles or rectangles.
Added support for vector data points in both table and tree views. Support their connections in the data points picker.
Improved he stability of the graph widget while a simulation is running.
Improved the data point picker user experience when modifying connections.
Improved error messages when adding connections.
Improved model state synchronization.
Improved the sidebar to make it hidden by default and open automatically when a block is selected.
Improved resizing blocks with 8 handles, preserving the x/y ratio only when the shift key is pressed.
Improved the auto scale of graphes by excluding hidden signals from the scale computation.
Improved consistency by scaling the graph widget with respect to the size of the diagram.
Fixed and re-enabled the Onboarding tour.
Fixed minor widget rotation bugs.
Fixed an issue where Dashboards would randomly freeze after resizing columns.
Fixed an issue where the order of graph signal colors was lost after a copy and paste.
Fixed where the graph widget would sometimes miss the trigger condition.
Fixed an issue about acquisition not working with a specific RT-LAB model's name.
Fixed lost connections after renaming in Simulink model.
Fixed the graph widget to scale with the Diagram for consistency.
Driver 1 (listed in alphabetical order) title in Heading 3 - List in this order (Added, Improved, Fixed, Removed)
Added an option to allow read/write operations on multiple coils and registers even if there are gaps between the address range.
RT-LAB Only - Include RT-EVENTS release notes - List in this order (Added, Improved, Fixed, Removed)
Added example model for OP1420 microgrid model, with high-level energy manager.
RT-EVENTS: Added support for the local documentation from Matlab blocs.
Reorganize the demos repository
Kept the official demo models in the demos folder.
Moved non-supported demo models to demos/drafts folder.
RT-LAB Only - List in this order (Added, Improved, Fixed, Removed)
Added FMU logger options for logging level and logging filter.
Fixed access violation crash when starting ePH simulation.
List in this order (Added, Improved, Fixed, Removed)
Added support new OP4815 (Versal) platform over Schematic Editor Workflow.
A more detailed list of release notes is available at C:\OPAL-RT\eFPGASIM\v2.16.2.35\Docs\ReleaseNotes\Releases_Notes.pdf
List in this order (Added, Improved, Fixed, Removed)
Added new FPGA firmware supporting 12 SFP cables connected to either plant or control side only.
Improved STATCOM and M3C examples model by adding new MMC Valves block in the library.