Documentation Home Page HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

TestView Command | Main | Snapshot

Snapshot Dialog Box

This snapshot command is the same as in the HYPERSIM ribbon: it saves into memory or loads from memory the values of the simulation (currents and voltages). It does not save any component parameters, so if changes are made in this regard, loading the snapshot afterwards might lead to network instabilities.

Note: Only one of the options should be checked per snapshot command.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323