Operating modes

Converter mode (rectifier = 0, inverter = 1): Operating mode of the converter;

• Blocking (Disabled = 0, Enabled = 1): If “0”, the converter is disabled; if “1” the converter is enabled;
• Regulator mode α constant IN/OUT(0/1): “1” for constant α regulation mode, “0” for normal mode;
• α constant reference: Value of the delay angle α when operating in constant α mode (degrees).
• Cathode connection (Neutral = 0, Line = 1): Specifies where the cathode side of the converter is connected; neutral side or DC line side.
• Firing (internal = 0; external = 1)