Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
OP8330 Configuration & Installation
For specific adaptation of the OP8330 module option:
- In order to access the channel sockets, simply unscrew the four screws installed at the back of the housing (the side without a label) to remove the back cover and expose the sockets.
Installation
The OP8330 was designed to be inserted between the OPAL-RT simulator and the unit under test. The HDB44 cables at both ends of the module can be securely attached by removing the back cover as explained above and using the HDB44 connector screws.
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323