Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
OP4810-IO/OP4815-IO - Receiving and Verification
Page Content
After opening the package, remove the equipment and components.
Locate all the items described in Standard Hardware section below.
Make sure that they are undamaged.
Standard Hardware
The OP4810-IO and OP4815-IO FPGA processor and IO expansion units includes the following hardware:
Name or Model Number | Description | OPAL-RT Part Number |
|---|---|---|
OP4810-IO | FPGA Processor and IO expansion Unit with AMD Versal™ Prime VM1302 Adaptative SoC | 429-0272 |
OP4815-IO | FPGA Processor and IO expansion Unit with AMD Versal™ Prime VM1402 Adaptative SoC | 429-0273 |
Power cable | Power Cord 6 ft North America & Japan (NEMA 5-15P to C13) - Type B | T00-0833 |
Documentation | System Description document | Not applicable |
Loopback kit | DB37 loopback board | 126-0361 |
DB37 loopback cable | 113-0737 | |
Breakout board | DB37 male slim breakout board, R/A connector | 126-0560 |
Optional Hardware
Item | Description | Part Number |
|---|---|---|
MuSE transceiver | Avago AFBR-57R5APZ | T00-0315 |
MuSE cable | LC-LC multimode 850 nm optical fiber, 2 meters (6.5 feet). Longer cables available. | T00-0797 |
ATTENTION
OPAL-RT strongly recommends the use of anti-static wrist straps whenever handling any electronic device provided by OPAL-RT.
Damage resulting from electrostatic charges is not covered by the manufacturer’s warranty.The OP4810-IO/OP4815-IO-IO may be subjected to electromagnetic interference (EMI) when installed in proximity to other devices.
Make sure to connect the unit ground to the rack to prevent any EMI related damage to the simulator.Disconnect power before servicing.
Rack Mount Brackets and Handles Assembly (Optional)
Usually, the rack mount brackets and handles are not assembled to the chassis.
Hardware List
The hardware for the rack mount brackets and handles are provided in a plastic bag.
2x 2U Rack Mount Brackets
2x Pull Handles Black Anodized Aluminum 8-32 x 3"
4x T00-6800 Black SS Phillips Flat Head Screws 8-32 X ½" long
8x T00-1402 Black, SS, Phillips Flat Head Screws 6-32 x 5/16" long
Assembling
Follow these simple steps to install the brackets and the handles.
For each side:
Remove the two (2) top front screws.
Put the screws away, they will be replaced with longer ones.
Assemble each rack mount bracket using 4 screws.
Do not use the screws you removed in the previous steps, they are too short.
4 screws per bracket, 6-32 x 5/16" flat head, Phillips, OPAL-RT P/N T00-1402
Assemble the handle to the bracket using two (2) screws.
2 screws per handle, 8-32 x ½" flat head, Phillips, OPAL-RT P/N T00-6800
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323