Documentation Home Page ARTEMiS Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

The most basic SSN separation we can make to use the SSN method is to use the filter bank connection point as an SSN node. Consequently, we need to understand the causality of the groups we are going to define from this (3-phase) node.

The transformer has an inductive impedance as seen from the SSN node.

The source also has an inductive type impedance.

Finally, the filter group has a capacitive impedance as seen from the SSN node because one of its components is a simple capacitor.

The SSN method was applied here only to the rectifier side of the HVDC system.

The inverter side is still simulated by standard state-space method of SPS/ARTEMiS. The SSN can be applied also to the inverter side.

Using the filter connection point as a node, we end up with 3 SSN groups, shown below.

  • No labels