Power Electronics Add-On 1.6.0

Added a new hardware configuration for the PXIe-7868R ((Archived) eHSx64_IM_IO_7868R) which supports eHSx64 coupled with an Induction machine solver

Added a new hardware configuration for the PXIe-7868R (eHSx64_Dual_PMSM_VDQ_IO_7868R) which supports eHSx64 coupled with two high performance PMSM VDQ solvers which can be configured to run in Constant or Variable parameter modes

Added a new hardware configuration for two PXIe-7868Rs ((Archived) Dual_eHSx64_Quad_PMSM_VDQ_IO_Dual_7868R) which each support eHSx64 coupled with two high performance PMSM VDQ solvers which can be configured to run in Constant or Variable parameter modes

Added a new hardware configuration for the NI FlexRIO platform ((Archived) eHSx128_Dual_PMSM_VDQ_IO_7976R) which supports eHSx128 coupled with two high performance PMSM VDQ solvers which can be configured to run in Constant or Variable parameter modes. Variable parameter mode uses a custom JSON file to configure the machine parameters.  

Added a new hardware configuration for the NI FlexRIO platform ((Archived) eHSx128_Dual_PMSM_SH_IO_7976R) which supports eHSx128 coupled with two high performance PMSM SH (spacial harmonics) solvers which can be configured using JMAG RTT files

Added support for multi-FPGA hardware configurations

Added support for multi circuit model configurations

Added support for Gain and Offset parameter updates for the analog output configuration while the simulation is running. See Analog Outputs Section.

Added support for configuring digital output mapping. See Digital Outputs Section.

Added support for configuring waveform mapping. See Waveforms Section.

Added sections for each type of support sensor (encoder, resolver, hall effect) for more intuitive configuration workflow. See Encoder and Resolver for more information.

Updated the Target names of each FPGA in a hardware configuration to reduce conflicts with default PXI RIO device names. 

Improved error messaging and display at the RT driver level