Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP4610-IO Receiving and Verification

After opening the package, remove the equipment and components.
Make sure that all the items described in Standard Hardware are in the box and are undamaged.

The OP4610-IO real-time simulator includes the following basic hardware:

Item

Description

Part Number

OP4610-IO chassis




OP4610-IO-MuSE
MuSE via one SFP socket

529-1920
OP4610-IO-DLPH
Dolphin SW-Link PCIe adapter
429-0246
OP4610-IO-PCIE
PCIe Target Cable Adapter
429-0270

I/O cables and connectors




DB37 loopback board DB37 loopback cable

126-0361
113-0737

DB9 terminal block (optional)

T00-0972

DB37 terminal block (optional)

T00-4069

5 m Plastic Optical Fibers (optional)

T00-0945

Power cable

1.83 m (6’) power cord, black (10A 125V)T00-0833

Documentation

System Integration binder


  • OPAL-RT strongly recommends the use of anti-static wrist straps whenever handling any electronic device provided by OPAL-RT.
    Damage resulting from electrostatic charges is not covered by the manufacturer’s warranty.
  • The OP4610-IO may be subjected to EMI when installed in proximity to other devices.
    Make sure to connect the OP4610-IO ground to the rack to prevent any EMI related damage to the simulator.
  • Disconnect power before servicing.

Rack Mount Brackets and Handles Assembly (Optional)

Usually, the rack mount brackets and handles are not assembled to the chassis.

Hardware List

The hardware for the rack mount brackets and handles are provided in a plastic bag.

  • 2x 110-3124 - 3U Rack Mount Brackets 
  • 2x T00-8185 - Pull Handles Black Anodized Alu. 8-32 x 3.5"
  • 4x T00-6800 - Black SS Phillips Flat Head Screws 8-32 X ½" long
  • 8x T00-1402 - Black, SS, Phillips Flat Head Screws 6-32 x 5/16" long

Assembling

Follow these simple steps to install the brackets and the handles.
For each side:

  • Remove the two (2) top front screws.
    • Put the screws away, they will be replaced with longer ones.

  • Assemble the rack mount bracket using 4 screws.
    • Do not use the screws you removed in the previous steps, they are too short.
    • 4 screws per bracket, 6-32 x 5/16" flat head, Phillips, OPAL-RT P/N T00-1402

  • Assemble the handle to the bracket using two (2) screws.
    • 2 screws per handle, 8-32 x ½" flat head, Phillips, OPAL-RT P/N T00-6800

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter