Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

This block is used to break a loop of blocks and indicate the sequence of calculation blocks in the loop to HYPERSIM.

Input/output
Input: u
Output: y

Parameters

yn = un-1

  • The block connected to the output must be calculated first
  • The block connected to the input must be calculated last
  • The first block receives the result from the last block, with one time-step delay, which is a natural delay that is not generated by the 1/z block.


  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter