The OP8E03 module converts four (4) output signals produced by an OP5330 Analog Output mezzanine module into four (4) current sources.
Each channel can be adjusted individually to convert ±16V voltages into either ±25mA or ±50mA current values.
Features
- Type-E module
- Converts four ±16V voltage signals into ±25mA or ±50mA current sources
- Input range individually configurable via switches
Board Layout
OP8E03 - Top View |
Channel Description
Gain
- ± 1V (from OP5330) = ±1.716mA for 25mA range.
- ± 1V (from OP5330) = ±3.383mA for 50mA range.
Switch Settings
The four switches are located on the top of the module They allow setting each channel to either the ±25mA or ±50mA output range:
Pin Assignment
Refer to the OP8E00 Modules Pin Assignment table
Note: Current outputs can be merged at the DB37 outputs to achieve a higher current range ( ex 2*50mA, or 4*25mA).