Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
OP8E03 Description
The OP8E03 module converts four (4) output signals produced by an OP5330 Analog Output mezzanine module into four (4) current sources.
Each channel can be adjusted individually to convert ±16V voltages into either ±25mA or ±50mA current values.
Features
- Type-E module
- Converts four ±16V voltage signals into ±25mA or ±50mA current sources
- Input range individually configurable via switches
Board Layout
OP8E03 - Top View |
Channel Description
Gain
- ± 1V (from OP5330) = ±1.716mA for 25mA range.
- ± 1V (from OP5330) = ±3.383mA for 50mA range.
Switch Settings
The four switches are located on the top of the module They allow setting each channel to either the ±25mA or ±50mA output range:
Pin Assignment
Refer to the OP8E00 Modules Pin Assignment table
Note: Current outputs can be merged at the DB37 outputs to achieve a higher current range ( ex 2*50mA, or 4*25mA).
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323