Block
Mask
Description
The USER LED Interface block allows access to user LED on the front panel of the OP4510 system. The block is user-customizable.
Parameters
| LED 0 Enable | Specifies whether to use (checked) or not (unchecked) the user display LED (USER LED 1) on the front panel of the system. |
|---|---|
| LED 0 Specification | Available only when the parameter LED 0 Enable is checked. Two options are available.
|
| LED 0 Option | Available only when the option As Block Parameters of the parameter LED 0 Specification is selected. This parameter allows users to select the state of the LED. |
| LED 0 Blinking Period | Made available if the LED 0 Option parameter is set Blinking. Specifies the blinking period of the LED. |
| LED 1 Enable | Specifies whether to use (check) or not (uncheck) the user display LED (USER LED 2) on the front panel of the system. |
| LED 1 Specification | Available only when the parameter LED 1 Enable is checked. Two options are available.
|
| LED 1 Option | Available only when the option As Block Parameters of the parameter LED 1 Specification is selected. This parameter allows users to select the state of the LED. |
| LED 1 Blinking Period | Made available if the LED 1 Option parameter is set Blinking. The parameter allows users to specify the blinking period of the LED. |
Inputs
This port is made available only if the developer selects the option As Input Port in the mask parameters.
| LED0Input | This signal allows users to set the status (e.g. Steady ON, Steady OFF, Blinking) of the USER 1 LED display on the front panel of the system. |
|---|---|
| LED1Input | This signal allows users to set the status (e.g. Steady ON, Steady OFF, Blinking) of the USER 2 LED display on the front panel of the system. |
Outputs
Unavailable
Characteristics and Limitations
This Block has no specific characteristics or limitations.
| Direct Feedthrough | N/A |
|---|---|
| Discrete sample time | N/A |
| XHP support | N/A |
| Work offline | YES |