Documentation Home Page ◇ RT-XSG Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP4510 User LED Interface

Owned by Sylvain Ménard
Last updated: Mar 11, 2023
2 min read

Block

Block

Mask

Mask

Description

The USER LED Interface block allows access to user LED on the front panel of the OP4510 system. The block is user-customizable.

Parameters

LED 0 EnableSpecifies whether to use (checked) or not (unchecked) the user display LED (USER LED 1) on the front panel of the system.
LED 0 Specification

Available only when the parameter LED 0 Enable is checked.  Two options are available.

  • The first option (As Input Port) creates an input port where the LED control is done externally to the block by the USER.
  • The second option (As Block Parameter) offers all LED control throught block parameter settings.
LED 0 Option

Available only when the option As Block Parameters of the parameter LED 0 Specification is selected. This parameter allows users to select the state of the LED. 

LED 0 Blinking PeriodMade available if the LED 0 Option parameter is set Blinking. Specifies the blinking period of the LED.
LED 1 EnableSpecifies whether to use (check) or not (uncheck) the user display LED (USER LED 2) on the front panel of the system.
LED 1 Specification

Available only when the parameter LED 1 Enable is checked.  Two options are available.

  • The first option (As Input Port) creates an input port where the LED control is done externally to the block by the USER.
  • The second option (As Block Parameter) offers all LED control throught block parameter settings.
LED 1 OptionAvailable only when the option As Block Parameters of the parameter LED 1 Specification is selected. This parameter allows users to select the state of the LED.
LED 1 Blinking PeriodMade available if the LED 1 Option parameter is set Blinking. The parameter allows users to specify the blinking period of the LED.

Inputs

This port is made available only if the developer selects the option As Input Port in the mask parameters.

LED0InputThis signal allows users to set the status (e.g. Steady ON, Steady OFF, Blinking) of the USER 1 LED display on the front panel of the system. 
LED1InputThis signal allows users to set the status (e.g. Steady ON, Steady OFF, Blinking) of the USER 2 LED display on the front panel of the system.

Outputs

Unavailable

Characteristics and Limitations

This Block has no specific characteristics or limitations.

Direct FeedthroughN/A
Discrete sample timeN/A
XHP supportN/A
Work offlineYES

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter