Block
Mask
Description
The SSI Master Unpacking block receives the data from the LoadIn block and recover all signals needed by the SSI Master Communication block. Signal concatenation and reordering is performed inside the block.
Parameters
This block has no parameters.
Inputs
| LoadIn | This signal must be connected to one of the Cfg_INi input ports of the LoadIn block. |
| LoadInSOF | This signal must be connected to one of the SofINi input ports of the LoadIn block. |
Outputs
| ClkDiv1 | This port is used to specify the SSI clock divider. The value is used to divide down the system clock to provide the SSI clock frequency. |
| TP_Time1 | This port is used to specify the pause time between two sequences of SSI clock. |
| BitRes1 | This port is used to specify the number of bit resolution. |
| MSBFirst1 | This port is used to specify the bit shift pattern. |
| GrayEncoded1 | This port is used to specify if the data is gray encoded or not. |
Characteristics and Limitations
This block has no specific characteristics or limitations.