Block

Mask

Description

The SSI Master Unpacking block receives the data from the LoadIn block and recover all signals needed by the SSI Master Communication block. Signal concatenation and reordering is performed inside the block.

Parameters

This block has no parameters.

Inputs

LoadIn	This signal must be connected to one of the Cfg_INi input ports of the LoadIn block.
LoadInSOF	This signal must be connected to one of the SofINi input ports of the LoadIn block.

Outputs

ClkDiv1	This port is used to specify the SSI clock divider. The value is used to divide down the system clock to provide the SSI clock frequency.
TP_Time1	This port is used to specify the pause time between two sequences of SSI clock.
BitRes1	This port is used to specify the number of bit resolution.
MSBFirst1	This port is used to specify the bit shift pattern.
GrayEncoded1	This port is used to specify if the data is gray encoded or not.

Characteristics and Limitations

This block has no specific characteristics or limitations.