Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

General

Product Name

32 Channels High Range DIO

Part Numbers

see OP8926 configurations options

Board Type

Digital input/output conditioning

Form Factor

SLSC

SLSC Module Design Specifications

Version 1.2.1

SLSC Compliance Level

1

Rear I/O Compatibility

[01] (Digital Input/Output up to 32 channels)

Hot-Plug support

no

Characteristic

Number of Channels

32 IO in 4 Banks configurable as inputs or outputs    Bank1 : D0-7    Bank2 : D8-15   Bank3 D16-23     Bank4 D24-31

Input direction

Input Impedance

> 100 K Ohm

Reverse voltage protection

Signal diode

Maximum  voltage protection

+/- 50 V

Detection threshold

4 programmable Schmitt Trigger  Level step  .1176V   from .470v to 29.4 Threshold high and  Threshold Low for each bank

Recommended levels threshold

The default thresholds are:   

LOW level = 1.5V

HIGH Level = 3.5V 

To improve noise immunity, a LOW-level Threshold of 1/3 Vuser, and a HIGH-level Threshold of 2/3 Vuser, are recommended.

Voltage Range

0 to 30 Vdc

Delay Low-to-High

10ns (implementation-dependent)                                                              

Delay High-to-Low

15ns (implementation-dependent)                                                         

Output Direction

Output Protection

50 mA resettable fuse

Output impedance

2 to 15 ohm

Protection thresholds

Maximum Vuser + 0.5V

Minimum  -0.5V

Output voltage range

4.5 to 24V Max ( default internal 4.5V)

Logic high levels ( typical) 

Vuser <= 25v , noload  :  Vuser -0.2V       50mA  : Vuser -0.8V       

Vuser  >  25v , noload  :  Vuser -3.5V       50mA  : Vuser -4.7V 

Logic Low levels ( typical) 

Vuser  5V to 30V     V low= 0.1V

Delay Low-to-high (  hardware typical * )

< 100ns @25c for  25V

< 90ns @25c for 5V                                       

Delay High-to-Low (  hardware typical * )

< 100ns @25c for  25V

< 90ns @5c for 5V                                       

Rise / Fall time ( x to Y)

< 20 ns @ 5V 

< 50ns @ 30V                                                   

Minimum Pulse detection (resolution)

90 ns   @   5V

130ns  30V

 Output Frequency

 DC to 8 Mbit (1)

Environmental

Important

Designed for indoor use only.

Storage temperature

-40 °C to 85 °C

Operating humidity

10% to 90% non-condensing

Storage humidity

5% to 95% non-condensing

Pollution Degree

2

Maximum altitude

2,000 m

Power requirement

21W

...