...
- Read and write analog data points
- Read and write binary data points
- Unsolicited responses can be allowed
- Event mode for analog and binary inputs can be configured
- Operate over TCP/IP
- Configurable network interface
- Configurable DNP3 link addresses
- Configurable scan period for analog and binary inputs
- Binary output commands: control relay output block (CROB)
Limitations
- Only DNP3 slave endpoint is supported.
- The indexes of the data points correspond to the order of their definition in the driver configuration, with the first signal starting at index 0.
- Only one DNP3 slave can be created per driver interface.
- RS-232/RS-422/RS-485 and UDP communication links are not supported (TCP/IP only).
- The supported data types are analog inputs, analog outputs, binary inputs, binary outputs and double bit binary inputs.
- The double bit binary inputs can have a value of 0, 1, 2 and 3, which are the only values that will be reflected on the DNP3 master.
- CROB command parameters 'clear' and 'queue' are not supported.