This block implements a controlled current source.
A controlled current source produces a current that follows the value of its input signal. The input signal can be supplied via an analog input channel or a signal from Simulink or HYPERSIM.
Parameters
Controlled current Iin [A] | Current input controlling the source. This measurement could be assigned to an analog input channel or a signal coming from Simulink or HYPERSIM. |
|---|
Inputs
| Iin | Current input controlling the source. This measurement could be assigned to an analog input channel or a signal coming from Simulink or HYPERSIM. |
|---|
Electrical ports
From top to bottom, the electrical ports are the positive and negative ports of the source respectively named p1 and n1