Documentation Home Page OPAL-RT Schematic Editor Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Controlled Current Source

This block implements a controlled current source.

controlled current source produces a current that follows the value of its input signal. The input signal can be supplied via an analog input channel or a signal from Simulink or HYPERSIM.

Parameters

Controlled current Iin [A]

Current input controlling the source. This measurement could be assigned to an analog input channel or a signal coming from Simulink or HYPERSIM.

Inputs

IinCurrent input controlling the source. This measurement could be assigned to an analog input channel or a signal coming from Simulink or HYPERSIM.

 Electrical ports

  • From top to bottom, the electrical ports are the positive and negative  ports of the source respectively named p1 and n1

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323