The OP8120 chassis has rails that allow quick installation of the modules in the appropriate slot.
- Simply position the module in alignment with the desired slot and push in firmly until the connector is firmly pressed into the backplane connector.
- When the module is in place, affix using the 4 screws provided.
- When all modules are in place, plug the power cable of the power supply (located in the back of the unit) to a power source.
- Power on the unit, using the power switch at the front. The LED should light up.
- The conditioning chassis is now operational.
Note: For details on how to operate each module, please consult the sections pertaining to the module in question.