The break-out box provides easy access to all signals on the I/O connectors. Using the OP8615 break- out box, you manually generate circuit faults (open circuit and short circuit) using jumpers to either break contact or connect a circuit. You can analyse and test electronic equipment by specifically testing each component and its connection.
By installing the break-out box as a link between the unit under test (ECU, motor controller, etc.) and the simulator, you can insert a fault at any point in the test to assess how the unit reacts to the fault. You can check and reconnect signals without changing the existing cable harness.
Features
- 128 low current circuits (5 amp)