Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP8615 Use and Features

The break-out box provides easy access to all signals on the I/O connectors. Using the OP8615 break- out box, you manually generate circuit faults (open circuit and short circuit) using jumpers to either break contact or connect a circuit. You can analyse and test electronic equipment by specifically testing each component and its connection.

By installing the break-out box as a link between the unit under test (ECU, motor controller, etc.) and the simulator, you can insert a fault at any point in the test to assess how the unit reacts to the fault. You can check and reconnect signals without changing the existing cable harness.


  • 128 low current circuits (5 amp)

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323