The OP8E10 module is designed to condition four low-voltage signals coming from an analog output mezzanine module of the simulator and produces 4 isolated analog voltage signals.
Features
- 4 channels
- Isolated inputs and outputs.
- Output short-circuit to ground protection.
- Sinking capability up to 0.03.
- Ultra-low distortion, low noise.
Board Layout
|
Channel Description
The circuit of each channel is designed around an isolation amplifier with an output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is highly resistant to magnetic interference.
Output voltage ripple:
Bandwidth (KHz) | 75 | 50 | 15 |
|---|---|---|---|
Output voltage ripple(mV) pk to pk | 150 | 40 | 20 |
NB: an RC series circuit is provided for damping.
Phase lag (In/out)
Typical Application Diagram
Pin Assignment
Refer to the OP8E00 Modules Pin Assignment table.