Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP8E10 Description

The OP8E10 module is designed to condition four low-voltage signals coming from an analog output mezzanine module of the simulator and produces 4 isolated analog voltage signals. 


  • 4 channels

  • Isolated inputs and outputs.

  • Output short-circuit to ground protection.

  • Sinking capability up to 0.03.

  • Ultra-low distortion, low noise.

Board Layout 

Channel Description

The circuit of each channel is designed around an isolation amplifier with an output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is highly resistant to magnetic interference. 

Output voltage ripple:

Bandwidth (KHz)




Output voltage ripple(mV) pk to pk




NB: an RC series circuit is provided for damping.

Phase lag (In/out)

Output Phase vs Freq.

Typical Application Diagram

Pin Assignment

Refer to the OP8E00 Modules Pin Assignment table.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323