The parameters are shown in the block diagram of the stabilizer diagram (st_Kag, st_Kap, st_Tag, st_Tap, st_Ks, st_Tw1, st_Tw2, st_T1, st_T2, st_T3, st_T4, st_T5, st_T6, st_Vsmin, st_Vsmax).
In addition, the stabilizer can be off via parameter stab_on. Moreover, the stabilizer can be modelized externally by a user-defined model, depending on the state of stab_mod switch.
- st_Tw2: Stabilizer time constant (s)• st_Tw1: Stabilizer time constant (s)
- Stab_on: Selection of stabilizer operation. (On=Normal operation; Off=no stabilizer)
- Stab_mod: Selection of stabilizer model. (Internal: actual model; External: model supply by user)
- st_Kag: Gain on gate opening;
- st_Kap: Gain on electric power;
- st_Tag: Time constant on gate opening (s)
- st_Tap: Time constant on electric power (s)
- st_Ks: Stabilizer gain
- st_T1: Stabilizer time constant (s)
- st_T2: Stabilizer time constant (s)
- st_T3: Stabilizer time constant (s)
- st_T4: Stabilizer time constant (s)
- st_T5: Stabilizer time constant (s)
- st_T6: Stabilizer time constant (s)
- st_Vsmin: Minimum limit of stabilizer voltage (pu)
- st_Vsmax: Maximum limit of stabilizer voltage (pu).