| BaseMVA | Base nominal electrical power of generator (MVA) |
| BaseMW | Base nominal mechanical power of turbine (MW) |
| BaseVolt | Base nominal voltage (kV) |
| Omb | Base nominal angular frequency (elec. rad/s) |
| Vref | Voltage reference (pu) |
| W0 | Frequency reference (pu) |
| Peo | Active power reference (MW) |
| Qeo | Reactive power reference (Mvar). (Used only when “Voltage Reference Selection” is “Vref=Vt”). |
| Voltage reference selection | Selection of reference signal for excitation. |
| HYPERSIM® can automatically calculate the value of Vref to supply to the excitation system in order to have a terminal voltage that corresponds to the Vref parameter. See Figure 5- 8 for more details. | |
| TFilPeo | Power reference filter (s) |
| DYN key | Key to access Dynedit database. |
Voltage Reference Section of Control Panel