Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Programmable General Parameters
- Sylvain Ménard
Owned by Sylvain Ménard
| BaseMVA | Base nominal electrical power of generator (MVA) |
| BaseMW | Base nominal mechanical power of turbine (MW) |
| BaseVolt | Base nominal voltage (kV) |
| Omb | Base nominal angular frequency (elec. rad/s) |
| Vref | Voltage reference (pu) |
| W0 | Frequency reference (pu) |
| Peo | Active power reference (MW) |
| Qeo | Reactive power reference (Mvar). (Used only when “Voltage Reference Selection” is “Vref=Vt”). |
| Voltage reference selection | Selection of reference signal for excitation. |
| HYPERSIM® can automatically calculate the value of Vref to supply to the excitation system in order to have a terminal voltage that corresponds to the Vref parameter. See Figure 5- 8 for more details. | |
| TFilPeo | Power reference filter (s) |
| DYN key | Key to access Dynedit database. |
Voltage Reference Section of Control Panel
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter